Piezo sphere hemisphere manufacturers take you to understand the process flow of piezoelectric ceramic sheets
2023-01-14 10:07
The manufacturer of Piezo sphere hemisphere tells you that piezoelectric ceramic sheets have been used by scientists in national defense construction, scientific research, industrial production and many fields closely related to people's lives, and have become versatile in the information age.

General process flow of piezoelectric ceramic sheet;
(1) Ingredients: Pre-treat the raw materials to remove impurities and moisture, then weigh various raw materials according to the formula ratio, and pay attention to put a small amount of additives in the middle of the bulk materials.
(2) Mixing and grinding: the purpose is to mix and grind various raw materials evenly, so as to prepare conditions for the complete solid-state reaction of pre-sintering. Piezo sphere hemisphere manufacturers tell you that dry grinding or wet grinding is generally used. Dry milling can be used for small batches, and stirring ball milling or jet milling can be used for large batches, with high efficiency.
(3) Pre-sintering: The purpose is to synthesize piezoelectric ceramics through solid-state reaction of raw materials at high temperature. Piezo sphere hemisphere manufacturers tell you that this process is very important and will directly affect the sintering conditions and the performance of the final product.
(4) Secondary fine grinding: the purpose is to finely vibrate, mix and grind the pre-fired piezoelectric ceramic powder evenly, so as to lay a good foundation for uniform porcelain formation and consistent performance.
(5) Granulation: The purpose is to make the powder form high-density particles with good fluidity. Piezo sphere hemisphere manufacturers tell you that this method can be done manually, but the efficiency is low. Currently, the most effective method is spray granulation. During this process, the adhesive is added.
(6) Forming: The purpose is to press the granular material into a billet of the required prefabricated size.
(7) Molding: The purpose is to remove the binder added in the granulation process from the billet.
(8) Firing porcelain: seal the green body and fire porcelain at high temperature. This link is quite important.
(9) Shape processing: Grinding the fired product into the required finished product size.
(10) Electrodes: Conductive electrodes are provided on the desired surface. The general methods are silver layer burning, chemical deposition and vacuum coating.
(11) High-voltage polarization: The manufacturer of Piezo sphere hemisphere tells you that the electric domains in the ceramic are oriented and arranged, so that the piezoelectric ceramic sheet has piezoelectric properties.
MORE
Contact us
2501b, block B, central Times Square, Longgang central city, Shenzhen,China