Piezoelectric hemisphere manufacturers take you to understand the practical application of piezoelectric ceramic sheets
2023-02-16 16:43
Piezoelectric hemisphere manufacturers tell you that piezoelectric ceramics can produce different high and low frequency vibrations through certain control of electronic circuits, thus making different sounds. Just like some of our electronic music greeting cards, it is through the inverse piezoelectric effect that this AC audio signal is converted into a nice sound signal. The following will take you to understand the welding process requirements of piezoelectric ceramics.
Introduction to the welding process requirements of piezoelectric ceramics:
1. The manufacturer of the Piezoelectric hemisphere tells you to adjust the temperature of the soldering iron to 280+/-20°C
2. To check the piezoelectric ceramic sheet, only good products can be used.
3. The silver-plated coating is particularly easy to damage, and the welding speed should be fast.
4. The solder joints are required to be full. There is no false welding and false welding, and there is no sharpening of solder joints.
5. The manufacturer of the Piezoelectric hemisphere tells you not to touch the piezoelectric ceramic sheet with bare hands. The sweat on your hands will corrode the piezoelectric ceramic sheet and cause oxidation.
MORE
Contact us
2501b, block B, central Times Square, Longgang central city, Shenzhen,China